Coated metal cutter for engraving.
Engraving milling cutter designed with opening angle (α) of 35º or 60º and a very stable geometry. All references have a coating developed to engrave on all types of metals ranging from:
-Steels.
- Stainless steels.
- Hard aluminum.
| Series | D1 | D2 | L1 | Angle | |
| XGR4600 | mm | mm | mm | α | z |
| Ref. | Metric | ||||
| XGR4630 | 0,2 | 3 | 40 | 35º | 1 |
| XGR4631 | 0,2 | 4 | 40 | 35º | 1 |
| XGR4632 | 0,2 | 6 | 40 | 35º | 1 |
| XGR4633 | 0,4 | 3 | 40 | 35º | 1 |
| XGR4634 | 0,4 | 4 | 40 | 35º | 1 |
| XGR4635 | 0,4 | 6 | 40 | 35º | 1 |
| XGR4637 | 0,2 | 3 | 40 | 60º | 1 |
| XGR4638 | 0,2 | 4 | 40 | 60º | 1 |
| XGR4636 | 0,2 | 6 | 40 | 60º | 1 |
| XGR4639 | 0,4 | 3 | 40 | 60º | 1 |
| XGR4640 | 0,4 | 4 | 40 | 60º | 1 |
| XGR4641 | 0,4 | 6 | 40 | 60º | 1 |
GR9000 series with conical tip for ENGRAVING all types of materials. Except for stainless steel and ferrous metals.
Materials:
+ Plastic
+ Wood
+ Aluminium
Special conical series for chamfering, folding and engraving plastics. Its helical geometry allows for perfect finishes on all types of plastic materials.
Carbide cutter with micro-polished helical helix that facilitates rapid chip ejection, leaving engraved surfaces clean and burr-free, both in plastics and non-ferrous metals. (*) References with D2 = 8 mm have a partially cylindrical cutting edge behind the conical edge, allowing for greater immersion depths (L2). Ideal for engraving and folding:
- Cast or extruded methacrylate.
- PC, PVC, foamed PVC, PP, PA, PE, ABS, etc.
- Solid surface materials: Corian®, Krion®, etc.
- Aluminium and aluminium composites: Dibond®, Alucobond®, etc.
- Copper, brass, zinc, etc.
Coated metal cutter for engraving.
Engraving milling cutter designed with opening angle (α) of 35º or 60º and a very stable geometry. All references have a coating developed to engrave on all types of metals ranging from:
-Steels.
- Stainless steels.
- Hard aluminum.
